J5800s

Promise VTrak J5000 Series
Affordable, Reliable Enterprise Level Storage
The VTrak J5000 Series delivers not only high performance, but an affordable SAS solution with advanced enterprise level reliability and functionality. The four external 12 Gb/s SAS ports per I/O module provide the connectivity for large capacity solutions requiring multiple cascaded JBODS and high bandwidth solutions that require blazing speeds. Fully redundant I/O modules, power supplies and cooling units, combined with a cable-less system design provides exceptional data availability, even during component failures.
HDDSSD
Data Center Ready
Backwards compatibility with 6 Gb/s SAS/SATA devices means that users have the ability to deploy 3 Gb/s, 6 Gb/s and 12 Gb/s HDD’s and SSD’s in the J5000 Series. With up to 90% power efficiency improving TCO by conserving power, reducing heat output and improving cooling costs. The internal 12Gb/s SAS expander-based architecture also allows for transparent access to each drive, enabling full utilization of the power management features built into modern hard drives.. The internal 12 Gb/s SAS expander-based architecture also allows for transparent access to each drive , enabling full utilisation of the power management features built in to modern HDD’s.
Datacenter
DataCenter Optimized By Enhanced Performance
The VTrak J5000 Series performs data transfer at incredible speeds, allowing you to optimize your data center. Administrators can deploy with the fastest SAS bus speed with 12Gb/s HDDs or SSDs. The backwards capability does not mean you aren’t able to optimise the full port bandwaidth of 12Gb/s to the host. Flash Arrays allow you to optimise speed for key enterprise apps that require utmost performance. The internal 12Gb/s SAS expander architecture allows for data to transfer with greater redundancy protection.
Form Factor | 4U/24 Bay |
---|---|
Drive Support | Up to 24 3.5? drives |
3/6/12 Gb/s SAS, 3/6 Gb/s SATA HDD and SSD | |
Supports any mix of SAS and SATA drives simultaneously in the same enclosure | |
External I/O Ports (per controller) | Each SBB 2.0 I/O module has four SAS ports using industrial standard Mini SAS HD connectors (SFF-8644), one port supports Wake-on SAS feature for upstream and other ports can be either upstream or downstream for cascading additional JBODs. |
Expander Management Features | Self-configuring expander supports full SAS domain topology management |
T-10 based zoning support is applicable for non-VTrak E-Class configurations | |
End Device Frame Buffering (aggregate bandwidth over multiple slow devices e.g. 6 Gb/s and 3 Gb/s) | |
Smart cable support to detect cable type and tune PHY automatically for maximum reliability | |
SMP – SAS Management Protocol | |
In-band access to Expander and PHY information | |
Statistic counters and performance monitors | |
SES EM- SES Enclosure Management (ANSI T10 SES 2 Compliant) | |
SCSI SES command set over virtual SSP device | |
Wake-on-SAS support, Wake-on-LAN support | |
Management Interfaces | LED status indicator support for drives, FRU and enclosure environmentals |
In–band SES enclosure management alerts user to out of spec operation: thermal condition, voltage condition or component failures, protecting data and hardware | |
Full subsystem management CLI through out–of–band RS232 serial port | |
Enclosure Protocol and Management | ANSI T10 SES 2, SMP (SES over in-band SAS) |
Persistence Error Logging with NVRAM, Extensive Service Report File, VPD (Vital Product Data) on Chassis and FRUs | |
Voltage | 100-240 Vac Auto-Ranging |
Current (Maximum) | 9A @ 100 Vac; 4A @ 240 Vac |
Power Conversion Efficiency | >80% @ 110V (>20% load), >80% @ 240V (>20% load) Temperature Range |
Temperature Range | Operational: 5° to 40°C |
Non-Operational: -40° to 60°C | |
Humidity | Operational: 10% to 90% (Non-Condensing) |
Non-Operational: 5% to 95% (Non-Condensing) | |
Acoustic Noise Levels | 55 dB (Typical), 65 dB (Maximum) |
Shock | Operational: 5G, 11ms duration |
Non-Operational: 10G, 11ms duration | |
Vibration | Operational: 0.3G, 5 to 500 Hz |
Non-Operational: 1G, 5 to 500 Hz | |
Safety and EMI Certification | EMC Class A: CE, FCC, VCCI, BSMI, RCM and KC |
Safety: IEEE CB, UL/cUL and TUV | |
Environment Standards | RoHS, GreenPC, WEEE |
Power Supply | Efficient 80PLUS GOLD Certified redundant PSU |
Dimensions | 174.4mm x 446.7m x 507mm |
(6.87? x 17.6? x 19.96?) | |
Weight | 29.6Kg(64 lbs) w/o drives |
49.6Kg (108 lbs) w/ drives | |
Warranty | 3-year full system limited warranty |