J5600s

J5600s

Promise VTrak J5000 Series

Affordable, Reliable Enterprise Level Storage

The VTrak J5000 Series delivers not only high performance, but an affordable SAS solution with advanced enterprise level reliability and functionality. The four external 12 Gb/s SAS ports per I/O module provide the connectivity for large capacity solutions requiring multiple cascaded JBODS and high bandwidth solutions that require blazing speeds. Fully redundant I/O modules, power supplies and cooling units, combined with a cable-less system design provides exceptional data availability, even during component failures.

HDDSSD

Data Center Ready

Backwards compatibility with 6 Gb/s SAS/SATA devices means that users have the ability to deploy 3 Gb/s, 6 Gb/s and 12 Gb/s HDD’s and SSD’s in the J5000 Series. With up to 90% power efficiency improving TCO by conserving power, reducing heat output and improving cooling costs. The internal 12Gb/s SAS expander-based architecture also allows for transparent access to each drive, enabling full utilization of the power management features built into modern hard drives.. The internal 12 Gb/s SAS expander-based architecture also allows for transparent access to each drive , enabling full utilisation of the power management features built in to modern HDD’s.

Datacenter

DataCenter Optimized By Enhanced Performance

The VTrak J5000 Series performs data transfer at incredible speeds, allowing you to optimize your data center. Administrators can deploy with the fastest SAS bus speed with 12Gb/s HDDs or SSDs. The backwards capability does not mean you aren’t able to optimise the full port bandwaidth of 12Gb/s to the host. Flash Arrays allow you to optimise speed for key enterprise apps that require utmost performance. The internal 12Gb/s SAS expander architecture allows for data to transfer with greater redundancy protection.

Form Factor3U/16 Bay
Drive SupportUp to 16 3.5" drives
3/6/12 Gb/s SAS, 3/6 Gb/s SATA HDD and SSD
Supports any mix of SAS and SATA drives simultaneously in the same enclosure
External I/O Ports (per controller)Each SBB 2.0 I/O module has four SAS ports using industrial standard Mini SAS HD connectors (SFF-8644), one port supports Wake-on SAS feature for upstream and other ports can be either upstream or downstream for cascading additional JBODs.
Expander Management FeaturesSelf-con?guring expander supports full SAS domain topology management
T-10 based zoning support is applicable for non-VTrak E-Class configurations
End Device Frame Buffering (aggregate bandwidth over multiple slow devices e.g. 6 Gb/s and 3 Gb/s)
Smart cable support to detect cable type and tune PHY automatically for maximum reliability
SMP – SAS Management Protocol
In-band access to Expander and PHY information
Statistic counters and performance monitors
SES EM- SES Enclosure Management (ANSI T10 SES 2 Compliant)
SCSI SES command set over virtual SSP device
Wake-on-SAS support, Wake-on-LAN support
Management InterfacesLED status indicator support for drives, FRU and enclosure environmentals
In–band SES enclosure management alerts user to out of spec operation: thermal condition, voltage condition or component failures, protecting data and hardware
Full subsystem management CLI through out–of–band RS232 serial port
Enclosure Protocol and ManagementANSI T10 SES 2, SMP (SES over in-band SAS)
Persistence Error Logging with NVRAM, Extensive Service Report File, VPD (Vital Product Data) on Chassis and FRUs
Voltage100-240 Vac Auto-Ranging
Current (Maximum)9A @ 100 Vac; 4A @ 240 Vac
Power Conversion Efficiency>80% @ 110V (>20% load), >80% @ 240V (>20% load) Temperature Range
Temperature RangeOperational: 5° to 40°C
Non-Operational: -40° to 60°C
HumidityOperational: 10% to 90% (Non-Condensing)
Non-Operational: 5% to 95% (Non-Condensing)
Acoustic Noise Levels55 dB (Typical), 65 dB (Maximum)
ShockOperational: 5G, 11ms duration
Non-Operational: 10G, 11ms duration
VibrationOperational: 0.3G, 5 to 500 Hz
Non-Operational: 1G, 5 to 500 Hz
Safety and EMI CertificationEMC Class A: CE, FCC, VCCI, BSMI, RCM and KC
Safety: IEEE CB, UL/cUL and TUV
Environment StandardsRoHS, GreenPC, WEEE
Power SupplyEfficient 80PLUS GOLD Certified redundant PSU
Dimensions131mm x 446.7mm x 507mm
(5.2? x 17.6? x 19.96?)
Weight25Kg(56 lbs) w/o drives
38.3Kg (84 lbs) w/ drives
Warranty3-year full system limited warranty