GSW-1600HP

16-Port 10/100/1000T 802.3at PoE+ Ethernet Switch

Centralized Power Management for Gigabit Ethernet PoE Networking

To facilitate 30W PoE power network applications with Gigabit speed transmission, PLANET GSW-1600HP 16-port Gigabit 802.3at Power over Ethernet Plus Switch features high-performance Gigabit IEEE 802.3af PoE (Up to 15.4W) and IEEE 802.3at PoE+ (Up to 30.8W) capabilities on all ports. By offering reliable switching technology and advanced networking features, the GSW-1600HP optimizes the installation and power management of network devices such as wireless access points, VoIP phones, and security cameras. It also eliminates time and cost of deployment by integrating power and data switching into one unit, and freeing network devices from restrictions of power outlet locations and the additional AC wiring.

Perfect Integrated Solution for PoE IP Surveillance

The GSW-1600HP brings an ideal secure surveillance system at a lower total cost. The GSW-1600HP provides 16 10/100/1000Mbps 802.3at PoE+ ports able to feed sufficient PoE power for 16 IEEE 802.3af/IEEE 802.3at PoE+ IP cameras at the same time. It is also able to connect with one 16-channel NVR or two 8-channel NVRs, uplinked to backbone switch and the monitoring center. With such high-performance switch architecture, the recorded video files from the PoE IP cameras can be saved to the NVR system where the administrator can control and monitor the surveillance images in both the local LAN and remote sites.

Energy-saving Design

The GSW-1600HP uses new engine that incorporates two advanced Green Networking technologies:

■ Idle Mode Link Down power saving

■ Intelligent Scales Power based on cable length

The Idle mode Link Down power saving of the GSW-1600HP complies with IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. The Intelligent Scales Power technology actively determines the appropriate power level based on the cable length. When connecting to the GSW-1600HP with Ethernet cable shorter than 20m, a device can obtain maximum power saving because the GSW-1600HP would automatically detect the Ethernet cable length and reduce power usage. The connected device can substantially reduce the overall power consumption, which makes a significant contribution to energy saving.

Easy Installation and Cable Connection

Providing data transfer and high Power PoE in one unit, the GSW-1600HP is able to reduce the need of extension cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the GSW-1600HP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

Department / Workgroup PoE Network

Providing 16 PoE in-line power interfaces, the GSW-1600HP can easily build a power that can centrally control IP phone system, IP camera system and wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the power-socket limitation, the GSW-1600HP makes the installation of cameras easier and more efficient.

Hardware Specifications 
Hardware Version2
10/100/1000BASE-T Copper Ports16 auto-MDI/MDI-X ports
802.3af / 802.3at PoE Injector Port16
Switch ArchitectureStore-and-Forward
Switch Fabric32Gbps/non-blocking
Switch Throughput@64 bytes23.8Mpps@64 bytes
MAC Address Table8K entries
Jumbo Frame9216 bytes
Flow ControlIEEE 802.3x pause frame for full-duplex; back pressure for half-duplex
LEDSystem :
 Power ( Green )
10/100/1000T RJ45 Interfaces :
 1000 LNK / ACT ( Green )
 10/100 LNK/ACT ( Orange )
 PoE ( Orange )
Dimensions (W x D x H)445 x 207 x 45 mm (1U height)
EnclosureMetal
Weight2.65kg
Power RequirementsAC 100~240V, 50/60Hz, 3.5A max.
Power Consumption/DissipationMax. 260 watts/885 BTU
Thermal Fan2
Power over Ethernet
PoE StandardIEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply TypeEnd-span: 1/2 (+), 3/6 (-)
PoE Power OutputPer port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
PoE Power Budget220 watts
Number of PDs, 7 watts16
Number of PDs, 15.4 watts14
Number of PDs, 30 watts7
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy-Efficient Ethernet
Environment
OperatingTemperature:0 ~ 50 degrees C
Relative Humidity:5 ~ 95% (non-condensing)
StorageTemperature:-10 ~ 70 degrees C
Relative Humidity:5 ~ 95% (non-condensing)
Ordering Information
GSW-1600HP16-Port 10/100/1000T 802.3at PoE+ Ethernet Switch