Simple and Efficient

Easy to use, high-speed transmission, supports hard disk replacement and UASP-execution for a more efficient data transfer.

Using UASP-enabled chipset can manage three to four times higher data transfer rates than USB 3.0. Thus, you can do things more efficient, faster and more enjoyable.

Insert the hard disks, connect the device to a computer or a server with a fast USB 3.0 cable, plug in the power plug, set RAID via dip switches and starting working with the storage.

Always prepared

The system will constantly monitor the drives. In the event where the drive is faulty it will warn the user. When HDD failure occurs, simply change the disk then the system will auto rebuild.

Safe and secured

The HDD compartment will be lock with a key. Only people that have the key will be able to open it. This would help prevent an irregular/accident extraction of the hard drive.

Model No.GR3660-B3
RAID chipJM561
Host InterfaceUSB3.0 UASP
Support Hard Drive2 x 2.5″-3.5″ SATA III SSD/HDD (6.0 Gb/s)
Single HDD CapacitySingle HDD tested up to 8TB
LED IndicatorsPower / HDD Access / HDD Failed / Rebuilding / Connection Status
Fan1 x 4cm Fan
Power Supply12V / 4A Adaptor
CertificationCE / FCC
Operating SystemWindows、Mac & Linux
Packing ContentPower Adaptor / USB 3.0 Cable / Quick Installation Guide / Accessory Kit
Dimension120(W) x 64(L) x 220(H) mm
Net Weight0.83Kg
HDD CapacitySingle HDD tested up to 8TB RAID 0 
Operating temperature50° to 95° F (10° to 35° C)
Storage temperature-4° to 116° F (-20° to 47° C)
Relative humidity5% to 95% noncondensing